How to avoid excessive force or excessive tilt angle when using the brush?

Release time:

2024-08-26

When using a bristle brush, avoiding excessive force or excessive tilt angle is the key to ensuring the service life and effect of the bristles.

When using a bristle brush, avoiding excessive force or excessive tilt angle is the key to ensuring the service life and effect of the bristles.
1. Understand the work requirements: first, it is necessary to clarify the specific purpose and working object of the brush. Different cleaning tasks have different requirements for the strength and angle of the brush. For example, cleaning a rougher surface may require a little more effort, but cleaning a fragile surface requires more gentleness.
2. proper grasp of strength: when using the brush, should grasp the appropriate strength. At the beginning, you can try to use a lighter force, and then adjust according to the actual effect. If the force is too large, it may not only cause the bristles to bend and deform, but may also damage the surface being cleaned. At the same time, also want to avoid continuous excessive force, so as not to cause arm fatigue.
3. Control the tilt angle: Too large a tilt angle may cause uneven wear of the bristles and even damage the brush head. Therefore, when using a bristle brush, try to keep the brush surface parallel or nearly parallel to the surface to be cleaned. For hard-to-reach corners or gaps, the angle can be adjusted appropriately, but excessive tilt should be avoided.
4. Pay attention to the direction of the brush head: When using a topbrush, the direction of the brush head is also very important. Generally, cleaning in the direction of the bristles will be more effective and can also reduce the wear of the bristles. If it is necessary to clean against the direction of the bristles, special attention should be paid to the control of the force and angle to avoid damage to the bristles.
5. Regular inspection and replacement: regularly check the wear of the bristle brush. Once the bristle is found to be deformed or worn seriously, a new bristle brush should be replaced in time. This avoids poor cleaning or damage to the surface being cleaned due to the use of excessively worn strip brushes.