Blog

Company News

Industry News

How to avoid excessive force or excessive tilt angle when using the brush?

How to avoid excessive force or excessive tilt angle when using the brush?

When using a bristle brush, avoiding excessive force or excessive tilt angle is the key to ensuring the service life and effect of the bristles.

26

2024

/

08

The use of test tube brush and matters needing attention

The use of test tube brush and matters needing attention

The test tube can be processed by swiping the card on a bench drill, vertical drill or on a lathe or horizontal grinding machine with appropriate stroke. When processing heavy and heavy workpieces, it can be stuck on the air drill and hand electric drill. Speed depending on the size of the workpiece in 50-100 r/min to choose their own. The up and down movement speed is about 30/min, and it can be moved up and down 8~10 times. The deburring and polishing tool brush shall be rotated or moved to the machined part. It is best to use light lubricants when processing, do not use solvents. It should not be used at high temperature, dry, and high speed. Deburring polishing tool brush in the choice of diameter, generally 5 ~ 15% larger than the aperture can be processed.

26

2024

/

08

What are the brush material of wool brush?

What are the brush material of wool brush?

There are many kinds of brush materials for the wool brush, and the common ones are as follows: 1. Nylon wire: nylon brush is widely used in all kinds of industrial brushes and civil brushes because of its high elasticity, high wear resistance and good chemical stability. According to the different nylon raw materials, its performance is also slightly different.

14

2024

/

07

< 12 >